Filter
Top Products
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the POWER button on the front panel.
Plug & Play Feature
When the TV is initially powered On, basic customer settings proceed automatically and subsequently:
Setting the language, checking the antenna input, memorizing the channels, and setting the time.
NOTE
• The Plug & Play function operates after plugging in the TV for the first time.
English - 26
Operation
1
Press the POWER button on the remote
control. The message “Menu language,
Channels and Time will be set.” is
displayed.
Press the ENTER button, then the
Language menu is displayed.
2
Press the ENTER button to enter the
language. Press the … or † button to
select language, then press the ENTER
button. “Selects the antenna to execute
the Auto Program Function.” menu is
automatically displayed.
3
Press the … or † button to memorize
the channels of the selected connection.
Press the ENTER button to select “Start”.
Continued...
Plug & Play
Skip
Select the language of the OSD.
Language
English
Español
Français
Plug & Play
Enter Skip
Air
Cable
Air+Cable
Selects the antenna to execute the
Auto Program function.
Start
Start
Start
Move
Enter
Move
• If the antenna is connected to ANT 1
IN (CABLE), select “Cable” and if it
is connected to ANT 2 IN (AIR),
select “Air”.
• If both ANT 1 IN and ANT 2 IN are
connected, select the “Air + Cable”.
• The Language menu will automatically
appear after several seconds, even if
the ENTER button is not pressed.
• The message to check the connected
status of the antenna is displayed.
Menu language, Channels and
Time will be set.
i
Start
BP68-00586A-00Eng(026~047) 2/13/06 2:18 PM Page 26