Samsung HL-S5686W Projection Television User Manual


 
Operation
English - 32
4
Press the or button to select the
Antenna connection, then press the
ENTER button.
When selecting Cable TV system:
Press the ENTER button to start the auto
program. By default, the cable TV system
is set to “STD”.
If you want to select another type of
cable system, press the œ button and
use the or button to select
“STD”, “HRC” or “IRC”.
Press the ENTER button.
5
Press the button to select “Start”, then
press the ENTER button to start the auto
program. The TV begins memorizing all
available stations. Press the ENTER button
at any time to interrupt the memorization
process.
Press the EXIT button to exit.
STD, HRC and IRC identify various types of cable TV systems.
Contact your local cable company to identify the type of cable system
that exists in your particular area.
At this point the signal source has been selected.
Auto Program
Move Enter Return
The TV must be connected to an
antenna in order to receive digital TV
signals. Even if a particular channel
is deleted from the memory, you can
always tune to that channel directly
by using the number buttons on the
remote control.
Selects the antenna to execute the Auto
Program function.
Air
Cable
Air+Cable
Start
Start
Start
Auto Program
Enter
Return
Selects a cable signal type for your location.
HRC
IRC
Start
Move
Auto Program
Selects a cable signal type for your location.
HRC
IRC
Start
Move Enter Return
Air : “Air” antenna signal
Cable : “Cable” antenna signal
Air+Cable : “Air” and “Cable”
antenna signals
STD
STD
Auto Program
Enter
Return
Auto program in progress.
Cable 26
Stop
37%
BP68-00586A-00Eng(026~047) 2/13/06 2:18 PM Page 32