Filter
Top Products
English - 57
LNA (Low Noise Amplifier)
If the TV is operating in a weak-signal area, sometimes the LNA function can improve
the reception (a low-noise preamplifier boosts the incoming signal).
1
Press the MENU button.
Press the … or † button to
select “Channel”, then press
the ENTER button.
2
Press the … or † button to
select “LNA”, then press the
ENTER button.
3
Press the … or † button to
select “On” or “Off”, then
press the ENTER button.
4
Press the EXIT button to exit.
NOTES
• LNA functions only when antenna is set to Air.
The settings will be stored separately in each channel.
• If the picture is noisy with the LNA set to On, select Off.
• The LNA setting needs to be set individually for each channel.
Channel
Antenna : Air
√
Auto Program
√
Channel Manager
√
Name
√
Fine Tune
√
Signal Strength
√
LNA : On
√
Move Enter Return
Channel
Antenna : Air
Auto Program
Channel Manager
Name
Fine Tune
Signal Strength
LNA : On
Move Enter Return
Channel
Antenna : Air
√
Auto Program
√
Channel Manager
√
Name
√
Fine Tune
√
Signal Strength
√
LNA : On
√
Move Enter Return
Off
On
BP68-00586A-00Eng(048~059) 2/13/06 2:19 PM Page 57