Samsung SDR4100 TV Video Accessories User Manual


 
English _69
! MAIN MENU
Mailing Service
You can send an e-mail to a DVR-registered user at a specific time interval, or if an event occurs.
M
`
If an event occurs with a channel where the camera’s video is set to <OFF> or the remaining recording count is set
to <OFF>, only the text notification will be sent to the applicable email address.
`
The e-mail receivers are not able to adjust the attached image quality.
SMTP Setting
Sets the SMTP mail server.
Using the mouse may help make setup easier.
1. In the <Network> setting window, press the up/down
(
$%
) button to move to <Mailing Service> and press the
[ENTER] button.
2. Select <SMTP>.
You will see the SMTP setting window.
3. Use direction buttons (
$%_ +
) to move to a desired item
and set the value.
•ServerType : Displays the connected server type.
•Server : Enter a server to connect to.
•Port : Sets the communication port.
•Use Authentication : Check this if the SMTP server uses user authentication.
The account input box will be activated.
•User : Enter a user to use authentication when connecting to the SMTP server.
•Password : Enter the password of the SMTP server user.
•Secure Transfer : Select one from <Never> and <TLS (if available)>.
•Sender : Use the virtual keyboard to enter the sender’s e-mail address.
`
Refer to “Using Virtual Keyboard”. (Page 36)
•TEST : Conducts the test on the server settings.
4. When the SMTP setting is done, press <OK>.
Mailing Service
SMTP
Event
OK Cancel
Use Authentication
Group Recipient
ServerType SMTP mail Server
Server
Port 25
User
Password
Secure Transfer Never
Sender ex. user@example.net
TEST