Samsung SHR-1040K DVR User Manual


 
SHR-1040/1040K USER’S MANUAL
1-3
English
No. Name Function
SHR-1040/1040K USER’S MANUAL
Power LED
HDD LED
Displays Normal Access to HDD. Upon Access to HDD, LED
repeats on and off.
Displays power On/Off condition.
1
2
3
5
Alarm LED
lights on when an event occurs.
Rec LED
Displays the record condition.
...
1 4
MODE
SEARCH
MENU
PIP
6
4
CH1, CH2,
CH3, CH4
The screen is switched to Single Mode when each channel
key is pressed during live programming, and the screen of
the channel is displayed in Full Screen.
During initial booting, the screen is displayed in four split.
When the Mode Key is pressed, the screen is switched to
single or split screen.
Enters the date/time of video and audio signals recorded in HDD,
select events from the RECORD and ALARM EVENT SEARCH,
and views the POWER EVENT LIST and LOSS EVENT LIST.
Displays the MAIN MENU, and exits the MENU Screen by
pressing the button again.
Enters the PIP Mode when the PIP Button is pressed in the
Single Screen. There must be two or more input channels.
(1) PIP is enabled when the sequence of the Single Screen
(Main Screen) is turned off.
(2) The Main Screen moves to Channel 1, 2, 3 and 4 in
sequence when the up/down or left/right button is pressed.
(3) Main-Sub switching: The screen is switched when the Enter
Button is pressed in the PIP Screen while the Sequence is
turned off.
Screen Split
Selection Button
SEARCH
MENU
PIP
[SHR-1040]
3
Part Names & Function
SHR-1040/SHR-1040K-ENG 2006.4.4 11:12 AM ˘ ` 1-3