Samsung SHR-1041K DVR User Manual


 
English _29
SETTINGS
AUDIO
In the <SYSTEM SETUP> window, use the direction
buttons (
$%_+
/ENTER) to select <SOUND>.
Select <AUDIO> and use the up/down buttons
(
$%
/ENTER) to select and set a desired item.
LIVE AUDIO : Set the audio output.
However, the channel that is set to COVERT does not output
sound. (page 26)
AUDIO MONITORING CHANNEL : Select an audio
channel to monitor among voice signals incoming from
audio ports 1 through 4.
NETWORK AUDIO TX : Turns on or off the function of the network audio output.
When your settings are completed, click <APPLY> on the bottom.
Your settings will be applied.
BUZZER
In the <SYSTEM SETUP> window, use the direction
buttons (
$%_+
/ENTER) to select <SOUND>.
Select <BUZZER> and use the up/down buttons
(
$%
/ENTER) to select and set a desired item.
KEYPAD : Turns on or off the buzzer in manipulation of
the front buttons.
REMOTE CONTROL : Turns on or off the buzzer in use
of the remote control.
When your settings are completed, click <APPLY> on the
bottom.
Your settings will be applied.
When done, if you want to move to the previous menu, press the [RETURN] button on the front panel or
the remote control, or click <
CAM1 CAM1
CAM1 CAM1
> on the top right corner.
3.
4.
5.
3.
4.
5.
6.
CAM1 CAM1
CAM1 CAM1
SOUND
AUDIO
BUZZER
APPLY UNDO
LIVE AUDIO ON
AUDIO MONITORING CHANNEL CH1
NETWORK AUDIO TX
ON
CAM1 CAM1
CAM1 CAM1
SOUND
AUDIO
BUZZER
APPLY UNDO
KEYPAD OFF
REMOTE CONTROL OFF
02235A_SHR-1041K_ENG.indb 29 2009-02-17 오전 10:50:51