Samsung SHR-2040 DVR User Manual


 
SHR-2040/2041/2042 USER’S MANUAL
7
Monitoring Mode
9-9
DVR(SHR-2040/2041/2042) / SITE Connection
- Select the name of DVR(SHR-2040/2041/2042) or site for connection and click
the connection button.
Connection Failure Cases
1. Password Certification Failure
- In case of discord between the Network password set to SHR-2040/2041/2042
and the connection password set to Smart Viewer, a window pops up to induce
retry of password input.
2. Admin User Connection Failure
- Where SHR-2040/2041/2042 that you wish to connect to has been already
occupied by other user in an Admin authority, you are authorized with access to
SHR-2040/2041/2042 concerned in a User authority.
Note
Note
You can set the name, IP, and password of DVR(SHR-2040/2041/2042) for
connection in the Setup mode. Also, the site setup which permits simultaneous
connection to multi-DVRs(SHR-2040/2041/2042) is available in the Setup mode.
You are allowed for the simultaneous connection with no more than 9
DVR(SHR-2040/2041/2042) as you approaches at the site.
SHR-2040/2041/2042-ENG-2 2005.6.29 5:2 PM Page 9-9