Filter
Top Products
SHR-2040/2041/2042 USER’S MANUAL
5-7
System Information and Setup
● Software Version : Displays the current version. Setup is not available.
● Broadcast Format : Displays the current Format(NTSC/PAL) . Setup is not available.
● Mac Address
: 6 Byte hardware address. Setup is not available.
● Device Erase
This erases the data in ATA / USB HDD / USB memory. Click the checkbox of the device
that you want to erase and press “OK” You are not allowed to erase the data in Backup
progress.
● USB S/W Upgrade
You can update the program by use of USB device. If there is no device, "USB S/W
Upgrade fail" window pops up.
Note 1
Note 1
[Internal HDD]
This is a physical hard disk connected with the IDE cable inside the SHR2040/2041/2042 main body, and
stores data.
[External HDD]
This is a physical hard disk connected with the port and terminal in the back of the
SHR2040/2041/2042 main body, and stores data.
This can be used as Extended HDD or Backup HDD.
- Extended HDD : Supplements Internal HDD quantity. Connected, it takes the place
of Internal HDD.
- Backup HDD : Backs up the data recorded in the set.
Note 2
Note 2
[ATA]
Usage : Internal HDD
This is a physical hard disk connected with the IDE cable inside the SHR2040/2041/2042 main body.
[USB]
Usage : External HDD(Extended HDD or Backup HDD)
This is a physical hard disk connected with the USB port in the back of the SHR SHR2040/2041/2042
main body,
SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 5-7