Filter
Top Products
5-18
4
Recording Mode
Record Mode
●
Details for Record Mode Menu are as follows.
If you press the front “REC” button, the mode value to be recorded will be set.
☛
For the setup of Event Recording Mode value, refer to 5-20. Event Recording
Mode Setup Menu.
● Mode
On : The current channel is recorded if the REC button is pressed.
Off : The current channel is not recorded even thought the REC button is pressed. The
default value is set to “On”.
● Quality
It sets the Quality.
Set to the one among Very high/High/Normal/Low.
● Rate
It sets the Rate means the number of screen recorded every second.
If it is set to 15 ips(NTSC)/12.5 ips(PAL), the system records too many screens per second
and the playback continues intermittently since recording is more detailed.
This is appropriate for concentrated monitoring zone setup.
IIn case of NTSC, select one out of 30 ips / 15 ips / 10 ips / 7.5 ips / 5 ips / 3 ips / 1 ips. In
case of PAL, select one out of 25 ips / 12.5 ips / 8.33 ips / 6.25 ips / 5 ips / 2.5 ips / 1 ips.
The Recording Menu will be activated depending on Video On/Off in the Camera Setup
(Menu5-12). When less than 2 cameras are activated at HALF D1, the frame rate of
recording may start from 30IPS and when more than 3 cameras are activated at Half D1,
the frame rate of recording may start from 15ips(NTSC) / 12.5ips(PAL). CIF supports from
30ips(NTSC) / 25ips(PAL) regardless of the number of activated camera.
● Video size
The Video size is displayed at the bottom of left.
NTSC
PAL
SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 5-18