Samsung SHR-2040 DVR User Manual


 
5-14
PTZ Device
ID
It is an ID for PTZ Camera and available to set from 0 to 255.
Protocol
It is supported by the PTZ device.
The following protocols are now being supported.
Samsung/ Vicon/ Panasonic/ AD/ Philips/ Erna/ PelcoD/ PelcoP/Vcltp/ Diamond/ Kalatel
Baurate
Baurate is supported by the PTZ device. 600/ 1200/ 2400/ 4800/ 9600/ 19200/ 38400
Parity
It is set to the one of None, Even, and Odd.
Data
It is set to either 7 or 8.
Stop
It is set to either 1 or 2.
Duplex
It is set to either Half Duplex or Full Duplex.
Caution
Caution
The above items shall be same to the PTZ device setup.
For the details, please refer to User Manual of the PTZ device manufacturer.
SHR-2040/2041/2042-ENG-1 2005.6.29 4:58 PM Page 5-14