Filter
Top Products
17
ENG
You can scan the frequency ranges available on your television and
in your area and store all the channels found automatically.
The channels are stored in the order in which they appear in the
frequency bands. It is possible that the automatically allocated
numbers may not correspond to those by which you wish to
identify the channels. If this is the case, refer to “Sorting the Stored
Channels” on page 21.
1 Press the MENU button.
Result:
The main menu is displayed.
2 Move the joystick up or down until the CHANNEL is selected and
press the joystick ( ) button.
Result:
The CHANNEL menu is displayed with the AUTO STORE
selected.
3 Press the joystick ( ) button again.
Result:
The AUTO STORE menu is displayed with the AREA
selected.
4 Select your area by moving the joystick left or right. The following
countries are available: ASIA/W.EUROPE - CIS/E.EUROPE -
CHINA - HONGKONG/UK - AUSTRALIA - NZ/INDONESIA - SOUTH
AFRICA - AMERICA.
5 Move the joystick up or down until the SEARCH is selected and
move the joystick left or right.
Result:
The horizontal bar is displayed, and then channels are
stored in an order which reflects their positions in the
frequency range. Finally, the search will end
automatically.
6 When searching and storing is complete, the SORT menu is
displayed.
To... Then...
Sort the stored channels Go to Step 4 of the “Sorting
into the desired numerical order the Stored Channels”
procedure on page 21.
Exit the channel store function Press the MENU button
without sorting the channels repeatedly until the menus
disappear.
Storing the Channels Automatically
SELECT ENTER EXIT
AUTO STORE
AREA : ASIA/W.EUROPE
SEARCH : -/+
SELECT ADJUST EXIT
CHANNEL
AUTO STORE
√√
MANUAL STORE
√√
ADD/ERASE
√√
FINE TUNE
√√
SORT
√√
AUTO STORE
AREA : ASIA/W.EUROPE
SEARCH : -/+
SELECT SEARCH EXIT
SORT
FROM : P 1
TO : P--
STORE : ?
SELECT ADJUST EXIT
EXIT
P 8 C--
426 MHz 22%