Filter
Top Products
15
ENG
When the picture size is distorted after moving the set, use the
Perfect Focus feature to adjust for the optimum picture size set in
the factory.
1 Press the MENU button.
Result:
The main menu is displayed.
2 Move the joystick up or down until the FUNCTION is selected and
press the joystick ( ) button.
Result:
The FUNCTION menu is displayed.
3 Move the joystick up or down until the CONVERGENCE is selected
and press the joystick ( ) button.
Result:
The
CONVERGENCE menu is displayed.
4 Move the joystick up or down until the PERFECT FOCUS is selected
and press the joystick ( ) button.
Result:
Perform Perfect Focus in the following sequence:
green
➞ red ➞ blue.
The Perfect Focus feature ends after the cursor flickers
for one second.
5 Press the MENU button repeatedly to return to normal viewing.
➣
You can use the Perfect Focus feature by simply pressing
the
PERFECT FOCUS button on the remote control.
➣
◆ If any error happens during Perfect Focus, then
perform Perfect Focus once again.
◆ If you can not make adjustments after Perfect Focus,
then make manual adjustments. Still you can not
make adjustments, contact your Service Center.
◆ If Perfect Focus operates by a wrong use of remote
control, then press the
MENU button to exit.
Using the Perfect Focus Feature
SELECT ENTER EXIT
FUNCTION
LANGUAGE : ENGLISH
TIME
√√
CONVERGENCE
√√
BLUE SCREEN : ON
SELECT ENTER EXIT
CONVERGENCE
MANUAL CONVERGENCE
RED
√√
BLUE
√√
PERFECT FOCUS
√√
PERFECT FOCUS
MODE ON
EXIT