Samsung SV-DVD54T DVD VCR Combo User Manual


 
ENG-12
8 Press the
or
buttons to start scanning channel.
Result: The frequency band is scanned and the first
station found is displayed.
9 Press the
or
buttons until the NAME is selected.
The station name is set automatically from the
broadcast signal.
10 To change the programmes name, press the
button.
Result: The first letter of the name flashes.
11 To... Then...
Select a character Press the
or
button until
the required character is
displayed (letters, numbers or -
character).
Move to the next or
Press the
or
buttons
previous character
respectively.
12 If you... Then...
Wish to store the
Press the
or
buttons
station displayed until the MFT is selected.
Press the
or
buttons to
adjust the picture, if necessary.
Press OK to store the station
Do not wish to
Press the
or
❷
buttons
store the station until the CH is selected.
displayed
Press the
or
buttons to
go on scanning the
frequency band and display
the next station
Go back to the beginning of
Step 9
13 Repeat this procedure from Step 6 onwards, until
all the required stations have been stored.
14 On completion, press the RETURN button three
times to exit the menu.
Presetting the Stations Manually
You do not need to preset the stations manually if
you have already set them automatically.
1 After pressing the MENU, press the OK or
.
Result: The Setup menu is displayed.
2 Press the corresponding
,
buttons to select the
Install option.
3 Press the OK or
to select this option.
Result: The Install menu is displayed.
Auto Setup
Manual Setup
Install
38
4 Press the corresponding
or
buttons, until the
Manual Setup option is selected.
5 Press the OK or
to select a Manual Setup option.
Result: The TV STATION TABLE menu is displayed.
6 Press the
or
buttons to select a programme
number as required.
7 Press the
button to preset the station.
Result: The MANUAL TUNING menu is displayed.
TV STATION TABLE
PR CH NAME
1
2
3
4
5
SWAPPING : OK
DELETE : CLEAR RETURN
MANUAL TUNING
PR :
CH : - - -
MFT : -
NAME : - - - -
MEMORY : OK
RETURN