Filter
Top Products
ENG-14
4 Press the corresponding
or
❷
buttons, until the
Colour System option is selected.
5 Press the OK or
❿
button to select
Auto
➝
PAL
➝
MESECAM
➝
B/W.
Auto When playing back a cassette, the system
standard is automatically selected by the
STB-DVD-VCR.
B/W Black and White
6 On completion, press RETURN three time to exit
the menu.
Your STB-DVD-VCR output channel may need to be
changed if the pictures suffer from interference or if
your TV cannot find the pictures.
Also, you can change the STB-DVD-VCR output
channel to adjust the frequency in which information is
displayed on the screen.
1 After pressing the MENU, press the OK or
❿
.
Result: The Setup menu is displayed.
2 Press the corresponding
,
❷
buttons to select
the Install option.
3 Press the OK or
❿
to select this option.
Result: The Install menu is displayed.
4 Press the
or
❷
buttons, until the VCR Output
CH option is selected.
5 Select the required output channel (CH28~CH69)
by pressing the OK or
❿
buttons
➝
CH28
➝
.. CH38
➝
.. CH69
6 On completion, press RETURN to exit the menu.
Then tune your television again (see page 9).
Before recording or playing back a cassette, you can
select the required system standard.
Otherwise, the system automatically selects the
reception standard when you select AUTO.
➢
◆
When playing back a cassette, the standard is
automatically selected by the STB-DVD-VCR.
◆
When you playback an NTSC-recorded tape on
this STB-DVD-VCR make a setting on the
colour system according to your TV.
If your TV is Multi System TV (NTSC 4.43
compatible), set NT4.43 and you can record
NT4.43.
1 After pressing the MENU, press the OK or
❿
.
Result: The Setup menu is displayed.
2 Press the corresponding
,
❷
buttons to select
the User Set option.
3 Press the OK or
❿
to select this option.
Result: The User Set menu is displayed.
Setting the STB-DVD-VCR Output
Channel
Selecting the Colour Mode
Auto Setup
Manual Setup
Install
38
CH 28
:
CH 38
:
CH 69
Colour System : Auto
IPC : On
G-Code Extend : Off
User Set
Auto
PAL
MESECAM
B/W