Filter
Top Products
26
Sensor input type can be setup in the Event setup screen in the Main menu. Refer
to ‘5.8.1 Event setup’ for details.
※ For SVR-950, sensors 10 to 16 are not connected (NC)
2. Relay output (RELAY OUT)
This is an alarm output terminal used to output alarms for sensor, motion detection, video loss and power
OFF to external devices.
For operation of each relay output, refer to the main menu event setup in ‘5.8.3
Relay setup’.
No. Description No. Description
1 NO1 Normal Open 14 D_IO 0 Digital I/O
2 CM1 Common 15 D_IO 1 Digital I/O
3 NC1 Normal Close 16 D_IO 2 Digital I/O
4 NO2 Normal Open 17 D_IO 3 Digital I/O
5 CM2 Common 18 D_IO 4 Digital I/O
6 NC2 Normal Close 19 D_IO 5 Digital I/O
7 NO3 Normal Open 20 D_IO 6 Digital I/O
8
9
10
11
12
13
CM3
NC3
NO4
CM4
NC4
GND
Common
Normal Close
Normal Open
Common
Normal Close
Ground
21
22
23
24
25
D_IO 7
GND
GND
GND
GND
Digital I/O
Ground
Ground
Ground
Ground