Filter
Top Products
Getting Started
English - 16 English - 17
Setup
Initial setup
The initial setup dialogue box appears when the TV is first activated. Follow the on-screen instructions to finish the initial
setup process, including the selecting the menu language, scanning channels, connecting to the network, and more.
During each step, either make a choice or skip the step. You can manually perform this process at a later time in the
System → Setup menu.
– If you connect any device to HDMI1 before starting the installation, the Channel Source will be changed to Set-top
box automatically.
– If you do not want to select Set-top box, please select Aerial.
Password Change
System → Change PIN
Changing the TV’s password
1.
Run Change PIN and then enter the current password in the password field. The default password is “0-0-0-0”.
2.
Enter a new password and then enter it again to confirm it. The password change is complete.
– If you forgot your PIN code, press the buttons in the following sequence to reset the PIN to “0-0-0-0”:
In Standby mode: MUTE → 8 → 2 → 4 → POWER (On)