Filter
Top Products
Getting Started
English - 8 English - 9
Cleaning Related
Warning
!
Before cleaning the product, unplug
the power cord.
• Otherwise, it may result in
electric shock or fire.
When cleaning the product, do
not spray water directly over the
product parts.
• Make sure that water does not
enter the product.
• Otherwise, it may result in fire,
electric shock or a problem
with the product.
Caution
Avoid spraying cleansing agent
directly onto the product.
• This may result in
discolouration or cracking of
the exterior of the product or
the panel coming off.
!
When cleaning the product,
disconnect the power cord and
clean the product with a soft cloth.
• Avoid using chemicals such as
wax, benzene, alcohol, thinner,
mosquito coil, fragrance,
lubrication or cleansing agent
when cleaning the product.
This may result in the exterior
being deformed or the print
being removed.
!
If you can't get the product clean
with just the supplied cloth, use a
soft, damp cloth with a "monitor-
exclusive cleansing agent" and
wipe the product with it.
• If no monitor-exclusive
cleansing agent is available,
dilute a cleansing agent with
water at a ratio of 1:10 before
cleaning the product.
Since the exterior of the product is
easily scratched, be sure to use a
soft cloth.
Usage Related
Warning
Since a high voltage runs through
the product, never disassemble,
repair or modify the product
yourself.
• Otherwise, it may result in fire
or electric shock.
• If the product needs to be
fixed, contact a service centre.
!
To move the product, turn the
power off and unplug the power
cord, the aerial cable and any other
wires connected to the product.
• Otherwise, it may result in
electric shock or fire due to the
damaged power cord.