Samsung TX-T3091WH Flat Panel Television User Manual


 
Connecting a DigitaJAudio System
The rear panel jacks onyour TV make it easy to connect a Digital Audio System to your TM.
Each Digital Audio System has a different back panel configuration.
Connect an Optical Cable between the DIGITALAUDIO
OUT (OPTICAL) jack on the TV and the Digital Audio Input
jack on the Digital Audio System.
When a Digital Audio System is connected to the DIGITAL
AUDIO OUT (OPTICAL) terminal: Decrease the gain
(volume) ofthe TV_and adjust the volume level with the
system's volume control.
5.1CH audio is possible when the TV is connected to an
external device supporting 5.1CH.
Digital Audio System Rear of the TV
What is OPTICAL?
Converts the electric signal into an optical light signal, and transmits itthrough glass fibers. S/PDIF is atransmission system of
digital audio in the form of a light wave that uses a glass conductor.
! RF (Digital/Analog), AV, S-Video ! Sound is output
DIGITAL AUDIO OUT (OPTICAL}
Component, HDMI Sound is notoutput
When the COMPONENT IN or HDMI IN jacks are connected, the Optical jack onthe TV does not output audio. If you want to hear
audio, connect the DIGITALAUDIO OUT (OPTICAL) jack onthe DVD player or Set-Top Box directly to anAmplifier or DVD Home
Theater, not the TV.
Connecting an Amplifier/DVD Home Theater =Analog
_;_ Each Amplifier/DVD Home Theater has adifferent back panel configuration.
When connecting anAmplJfier/DVD HomeTheater, match the color of the connection terminal to the cable.
Connect Audio Cables between theAV OUT
[L-AUDIO-R] on the TV andAUDIO IN on theAmplifier/
DVD Home Theater.
When anaudio amplifier is connected to the AUDIO OUT
[L-AUDIO-R] terminals: Decrease the volume ofthe TV,
and adjust the volume level with theAmplifier's volume
controk
_Amplifier/
[_ _: I DVDHomeTheater
Audio Cable (Not supplied)
Rear of the TV
t RF (Digital/Analog), AV, S-Video JSound is output
AV OUT L-AUDIO-R Component, HDMI ! Sound is notoutput
When the COMPONENT IN or HDMt IN jacks are connected, the AV Out jacks on the TV does not output audio. Ifyou want to hear
audio, connect the AUDIO OUT jacks on the DVD player or Set-Top Box directly to anAmplifier or DVD Home Theater_notthe TV.