Filter
Top Products
Connecting a VCR
Video Connection
These instructions assume that you have already connected your TVto an antenna or a cable TV system(according to the
instructions on page 6). Skip step 1 if you have not yet connected to an antenna or a cable system.
_,_ • Each VCR has a different back panel configuration.
• When connecting aVCR, match the color of the connection terminal to the cable.
1 Unplug the cable or antenna from the back of theTV.
2 Connect the cable or antenna to theANT IN terminal onthe
back of the VCR.
3 Connect an Antenna cable between the ANT OUT terminal
onthe VCR and theANT iN terminal on the TV.
4 Connect a Video Cable betweenthe VIDEO OUT jack on
the VCR and the AV iN 1 [VIDEO] jack on the TV.
5 Connect Audio Cables between theAUDIO OUTjacks on
the VCR andthe AV iN 1 [L-DVI IN/AUDIO-R]jacks on the
TV.
If you have a "mono' (non-stereo) VCR, use a
Y-connector (not supplied) to hook up to the right and
left audio input jacks of the TV. Ifyour VCR is stereo,
you must connect two cables.
Also, you can connect toAV IN 2 on the side panel of TV.
Rear of the TV
VCR _ q@e L_J
J\ @ [_J
%
AntennaCable(Netsupp!ied)
S-Video Connection
Your Samsung TV can be connected to the S-Video jack of a VCR.
(This connection delivers a better picture when compared to the regular video connection above.)
• Each VCR has a different back panel configuration.
• When connecting aVCR, match the color of the connection terminal to the cabte.
1 Tobegin, follow steps 1-3 inthe previous section to
connect the antenna or cable to your VCR and your TV.
2 Connect an S-Video Cable between the S-VIDEO OUTjack
onthe VCR and theAV IN 2 [S-VIDEO] jack on the TV.
3 Connect Audio Cables between theAUDIO OUTjacks on
the VCR and the AV iN 2 [L-AUDIO-R] jacks on the TV.
Some games may be displayed with a cut off picture when
the TV is connected to a game player.
VCR
Side of the TV Rear of the TV
Connecting a Camcorder
The side panel jacks on your TV make it easy to connect a camcorder to your TV.
They allow you to view the camcorder tapes without using a VCR.
_,_ • Each Camcorder has a different back panel configuration.
• When connecting a Camcorder, match the color of the connection terminal to the cable.
1 Connect a Video Cable (orS-Video Cable) between the
AV IN 2 [VIDEO] (or S-ViDEO) jack on the TV and the
VIDEO OUTjack on the camcorder.
2 Connect Audio Cables between theAV IN 2
[L-AUDIO-R] jacks on the TV and theAUDIO OUT jacks on
the camcorder.
Camcorder
Side of the TV