Filter
Top Products
98 99
●
10p White Balance: Adjusts the white balance by adjusting the brightness of the red, green, and
blue elements in 10-point intervals. This option is only available when Picture Mode is set to
Movie and may not be supported by some external devices.
Try Now
●
Gamma: Adjusts the primary color intensity.
Try Now
●
Expert Pattern: Displays picture calibration patterns on the screen without using a separate
pattern generator or filter. Pattern1 is used to calibrate the contrast, and Pattern2 is used for
calibrating the color and color saturation. If the screen menu disappears or a different menu is
activated while the screen is being calibrated, this option will save the changes up to that point
and automatically deactivate that menu. This feature is enabled in Component and HDMI modes
only.
Try Now
●
Motion Lighting: Adjusts the picture brightness depending on the on-screen movements for
reduced power consumption. This feature is only available when Picture Mode is set to Standard
and is not available in 3D mode. In addition, adjusting Contrast or Brightness automatically
deactivates this feature.
Try Now
Picture Options
가상리모컨
¤
> Menu
m
> Picture > Picture Options
Try Now
Picture Options
Color Tone Standard
Digital Clean View Auto
MPEG Noise Filter Auto
HDMI Black Level Low
Film Mode Off
Auto Motion Plus Standard
Cinema Black Off
"
The displayed image may differ depending on the model.
Use Picture Options to further improve the picture quality. When connected to a computer via an
HDMI-to-DVI cable, users can only change Color Tone.