Filter
Top Products
☛ You do not need to preset the stations manually if you
have already set them automatically.
1 After pressing the MENU, press the OK or
.
Result: The Setup menu is displayed.
2 Press the corresponding
,
buttons to select the Install
option.
3 Press the OK or
to select this option.
Result: The
Install menu is displayed.
4 Press the corresponding
or
buttons, until the Manual
Setup option is selected.
5 Press the OK or
to select a Manual Setup option.
Result
: The TV STATION TABLE menu is displayed.
6 Press the
or
buttons to select a programme number as
required.
7 Press the
button to preset the station.
Result
: The MANUAL TUNING menu is displayed.
8 Press the
¥
or
buttons to start scanning channel.
Result: The frequency band is scanned and the first station
found is displayed.
9 Press the
or
buttons until the NAME is selected.
The station name is set automatically from the broadcast signal.
10 To change the programme’s name, press the
button.
Result
: The first letter of the name flashes.
11 To... Then...
Select a character Press the
or
button until the
in the name required character is displayed
(letters, numbers or “-” character).
Move to the next or Press the
or
¥
buttons
previous character respectively.
12 If you... Then...
Wish to store the ◆ Press the
or
buttons until the MFT
station displayed is selected.
◆ Press the
¥
or
buttons to adjust the
picture, if necessary.
◆ Press OK to store the station
Do not wish to ◆ Press the
or
buttons until the CH
store the station is selected.
displayed
◆ Press the
¥
or
buttons to go on
scanning the frequency band and display
the next station
◆ Go back to the beginning of Step 14
13 Repeat this procedure from Step 6 onwards, until all the required
stations have been stored.
14 On completion, press the RETURN button three times to exit the
menu.
22
GB
Presetting the Stations Manually
MANUAL TUNING
PR :
CH : - -
MFT : -
NAME : - - - -
MEMORY : OK
RETURN
TV STATION TABLE
PR CH NAME
1
2
3
4
5
SWAPPING : OK
DELETE : CLEAR RETURN
Auto Setup
Manual Setup
Install
TV System : G
VCR Output CH : CH 36
Auto Setup
Manual Setup
Install
VCR Output CH : CH 38
Australia Model
Newzealand Model
VCR
00169N DVD-V70/XSA-GB2 11/14/05 10:11 AM Page 22