Filter
Top Products
51
GB
Setting Up the Audio Options
1 With the unit in Stop mode, press the MENU button.
2 Select DVD using
,
buttons, then OK or
button.
3 Select Audio Setup using
,
buttons, then press the OK or
button.
4 Use the
,
buttons to select the desired item. Then press the
OK or
button.
• Dolby Digital Out
1. PCM:
Converts to PCM(2CH) audio.
Select PCM when using the Analog Audio Outputs.
2. Bitstream :
Converts to Dolby Digital Bitstream (5.1CH).
Select Bitstream when using the Digital Audio Output.
➢
•
Be sure to select the correct Digital Output or no audio will be
heard.
• MPEG-2 Digital Out
1. PCM :
Converts to PCM(2CH) audio.
Select PCM when using the Analog
Audio Outputs.
2. Bitstream : Converts to MPEG-2 Digital Bitstream (5.1CH or
7.1CH).Select Bitstream when using the Digital Audio Output.
• DTS
1. Off :
Doesn’t output digital signal.
2. On :
Outputs DTS Bitstream via digital output only.
Select DTS when connecting to a DTS Decoder.
• Dynamic Compression
1. On : To select dynamic compression.
2. Off
: To select the standard range.
• PCM Down Sampling
1. On :
Select this when the amplifier connected to the player is not
96KHz compatible.
In this case, the 96KHz signals will be down converted to
48KHZ.
2. Off : Select this when the amplifier connected to the player is
96KHz compatible.
In this case, all signals will be output without any changes.
DVD
➢
•
How to make the SETUP menu disappear or return to menu screen during set up;
Press RETURN or
¥
button.
• Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
• “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
DTS
Dolby Digital Out
MPEG-2 Digital Out
PCM Down Sampling
Setup
Setup
Setup :
Display Setup
00169N DVD-V70/XSA-GB 3 11/14/05 9:57 AM Page 51