Filter
Top Products
34 English
SETTINGS
4 DISPLAY/BUZZER SET
You can set the display item on the operation display area.
This sub-menu also lets you set a warning buzzer to sound
for alarms or when the hard disk space reaches zero. You
can set items as needed.
[Settings] ( indicates initial setting.)
<MAIN MENU>
<DISPLAY/BUZZER SET> setting items
(1)
(2)
(3)
(4)
(5)
(6)
(7)
<SUB MENU>
(8)
(9)
X180 HI A
05-20-04 AL 00015
08:30:35 ----------
X180 HI A
05-20-04 AL 00015
08:30:35 ----------
(1)
(2) (4)
(3)
Item Setting Description
(1) DATE/TIME
ON Display date/time in operation display area.
OFF Don’t display date/time in operation display area.
(2) QUALITY/AUDIO
ON Display picture quality and “A” (audio recording) in operation display area.
OFF Don’t display picture quality or “A” (audio recording) in operation display area.
(3) DVR NAME
ON Display name set for digital video recorder.
OFF Don’t display name set for digital video recorder.
(4) ALARM COUNT
ON Display current alarm count in operation display area.
OFF Don’t display current alarm count in operation display area.
(5) ALARM ON
ON Sound buzzer when alarm is received.
OFF Don’t sound buzzer when alarm is received.
(6) DISK FULL
ON When “OVER WRITE” is not set, sound buzzer when remaining hard disk space reaches zero.
OFF When “OVER WRITE” is not set, don’t sound buzzer when remaining hard disk space reaches zero.
(7) KEY IN
ON Sound buzzer when operation button is pressed.
OFF Don’t sound buzzer when operation button is pressed.
(8) WARNING
ON
The buzzer sounds in the following cases: zHard disk drive error zFan error zRecording error.
zNo input signal when VIDEO LOSS is ON.
OFF
Don’t sound buzzer in the following cases: zHard disk drive error zFan error zRecording error
zNo input signal when VIDEO LOSS is ON.
(9) NON REC
ON Sound buzzer when recording stops, or when recording is intentionally stopped.
OFF Don’t sound buzzer when recording stops.
e00_l8hae_us_7.book Page 34 Thursday, April 8, 2004 11:14 AM