Sanyo PLV-65WHD1 Projection Television User Manual


 
13
This is the best option for picture and sound! Using the HDMI connection, which has high-
definition content protection, provides you with uncompressed digital video and audio, Dolby®
Digital 5.1 or PCM sound. This connection requires only one cable. As Real As It Gets!
CONNECTING EXTERNAL EQUIPMENT TO HDMI
(INCLUDES HDCP COPY PROTECTION)
Switch off the LCD Projection TV and external equipment
before connecting cable. (Cable is not supplied.)
1
Connect the external equipment’s high bandwidth
HDMI Output to the LCD Projection TV’s HDMI
Input.
2
The LCD Projection TV must be turned on first,
press POWER. Then turn on your external
equipment.
3
Press INPUT to select HDMI to
view a digital program.
What you will need for connections:
19 Pin HDMI Digital Cable – 1
(Make sure you check the pin
configuration of the cable plug-end*)
*Adapter may be required. Check with
your local electronics store.
1
4 5 6
2 3
INPUT
POWER
REMOTE CONTROL
3
2
To avoid problems with some brands of external
equipment, follow this procedure when connecting
cables and powering on your equipment.
DIGIT
AUD
OUTP
HDMI
DIGIT
AUDI
OUTP
SET-TOP BOX (Can be a Digital Satellite Receiver,
DVD PLAYER, or similar digital device.)
PTV BACK
1
If the television HDMI pin configuration is different from
the pin configuration on your set-top box, you will need to
use an Adapter.
Press the INPUT key after connecting cables to access the
AV Inputs. There is NO need to tune to a blank channel.
“No Signal” will appear on the screen when no signal is
detected.
IMPORTANT NOTE FOR MONITOR USE:
If you did not connect an antenna, you must
run All Channel Search twice before you can
select the AV inputs.
HDMI Cable
(Gently insert
cable into
PTV’s HDMI
Input jack.)
DIGITAL AV CONNECTIONS