Sanyo PLV-65WHD1 Projection Television User Manual


 
21
This LCD Projection TV can receive unscrambled
(ClearQAM) digital cable channels, when available.
However, not all cable companies provide ClearQAM
digital channels.
Searching for digital cable channels will take about 10
minutes, please be patient.
1
Connect a Digital Cable signal
directly to the LCD Projection TV
Digital Antenna In Terminal.
2
Press the TUNER key to select the Digital Tuner.
Note: When an external input is selected (VIDEO1–3, or
HDMI), press INPUT key to select the Digital Tuner.
3
Press the MENU key to display the Main menu.
4
Use the CURSOR ed keys to highlight (green)
Digital Cable Search. Press ENTER.
5
Use the CURSOR d key to select Yes. Press
ENTER.
DIGITAL
ANTENNA IN
Note: After Channel Search is complete, the LCD
Projection TV will tune to the lowest Digital Cable
channel (or lowest Analog channel if no Digital Cable
channel is found).
IMPORTANT FACT: This LCD Projection TV maintains only one
database of digital channels. Therefore, when you search for
ClearQAM digital cable channels, the database of antenna
digital channels will be deleted. You will only be able to receive
those ClearQAM channels your cable company provides.
Cable companies rearrange virtual
channels as programming changes,
which may cause the program you
are watching to move to an-other channel. This message will
appear on the screen briefly to notify you of a change. You will
have to relocate the program you were watching by scanning
through the channels.
To restore the antenna digital channel database, reconnect the
antenna and use the menu system to perform an All Channel
Search.
Program change
from cable company
Start Digital Cable Search?
Note: If the LCD Projection TV is switched off by pressing the
POWER key or unplugging the AC during Digital Add-On
Search, all channel information detected before the power
loss occurred will be saved.
Digital Add-on Search?
Use this feature to add new channels to the digital
antenna channel database. Also, use this feature to add
channels when broadcast towers are in multiple
directions from your location.
1
Press the TUNER key to select the Digital Tuner.
Note: When an external input is selected (VIDEO1–3, or
HDMI), press INPUT key to select the Digital Tuner.
2
Press the MENU key to display the Main menu.
3
Use the CURSOR ed keys to highlight (green)
Digital Add-On Search. Press ENTER.
4
Use the CURSOR d key to select Yes. Press
ENTER.
Notes:
Turn your Antenna and repeat these steps for each
direction in which there are transmitting towers.
Go to www.antennaweb.org and type in your zip code
to obtain specific tower and antenna information.
DIGITAL ADD-ON SEARCHDIGITAL CABLE SEARCH (OPTIONAL)