Sanyo PLV-65WHD1 Projection Television User Manual


 
16
USING THE ANALOG VIDEO1 JACKS TO CONNECT A VCR
(OR OTHER ANALOG DEVICE)
Switch off the LCD Projection TV and external equipment
before connecting cable. (Cable is not supplied.)
1
Connect VCR’s Audio Video Out to the LCD
Projection TV’s VIDEO1 jacks.
Note: For Mono VCR (Single Audio Jack), connect VCR
Audio Out to LCD Projection TV’s AUDIO-L (MONO)
Input.
2
Optional:
Connect VCR’s S-Video Out to the LCD Projection
TV's S-VIDEO In Jack.
Note: S-Video jack connections override VIDEO1 Video
jack connection.
3
Press POWER to turn on the LCD Projection TV,
then turn on external equipment.
4
Press INPUT to select Video 1 to
view the VCR program.
What you will need for connections:
Audio Video Cable – 1
S-Video Cable – 1
Note: Don’t be fooled by the phrase “Available in High-
Definition.” Composite jacks offer only 480i (SDTV)
resolution. To view available High-Definition (HD) programs,
you must connect your HD equipment to the Component or
HDMI jacks.
Press the INPUT key after connecting cables to access
the VIDEO1 input. There is NO need to tune to a blank
channel.
“No Signal” will appear on the screen when no signal is
detected.
S-VIDEO
VIDEO
VIDEO
2
R-AUDIO-L
(MONO)
R-AUDIO-L
(MONO)
Y–––––Pb–––––Pr
VIDEO
1
PTV BACK
IMPORTANT NOTE FOR MONITOR USE:
If you did not connect an antenna, you must
run All Channel Search twice before you can
select the AV inputs.
1
4 5 6
2 3
INPUT
POWER
REMOTE CONTROL
43
1
2
VCR BACK
S-VIDEO
CABLE
AUDIO
VIDEO
CABLE