Filter
Top Products
ALARM RECORDING
Alarm Scan
To look for an alarm recording by viewing the first 5
seconds of each alarm recording.
1 Press the SEARCH/AUDIO ON button twice during
stop mode.
ø
“AL SCAN” will be displayed on screen.
2 Press the FF (or REW) button.
ø
The unit will advance (or rewind) the tape at high
speed and playback the first 5 seconds of every
alarm recording.
ø
To cancel the alarm scan mode, press the
STOP
button.
3 While the desired recording is being played back,
press the PLAY button.
ø
Playback will start, alarm scan mode is cancelled.
Alarm Search
To go to the beginning of a desired alarm recording.
1 Press the SEARCH/AUDIO ON button during stop
mode.
ø
“AL SEARCH 01” will be displayed on screen.
2 Press the REC/PLAY SPEED l (or j) button to set
the desired alarm number (1 to 99), then press the FF
(or REW) button.
ø
The desired alarm is searched and a still image
of the beginning of the alarm recording will
appear on-screen.
NOTE:
X The alarm number is relative to the actual tape
position. (Please refer to the illustration below.)
3 Press the PLAY button.
ø
Playback will start.
Playback
112
Rewind direction
Fast-forward direction
Actual position
Alarm number 2
Alarm trigger input point
RC4Q/NA2 (TLS-9072 GB) Thu. Sept., 07/2000
22 English