Filter
Top Products
SETTING THE BUZZER
A buzzer can be set to sound during alarm recording, if
during recording the tape reaches the end, if buttons are
pressed or if there is a mechanical failure that causes the
tape to stop or be ejected, etc.
1 Press the MENU button until the (SET UP 2) menu is
displayed.
@@@@@@@<SET@UP@2>
*DISPLAY
@@@DATE@@@@@@@@@@@Y
@@@TIME@@@@@@@@@@@Y
@@@ALARM@COUNT@@@@Y
@@@SPEED@@@@@@@@@@Y
*BUZZER
@@@ALARM@IN@@@@@@@Y
@@@TAPE@END@@@@@@@Y
@@@KEY@IN@@@@@@@@@N
@@@WARNING@@@@@@@@Y
2 Press the * (or +) button, until the desired item for
which the buzzer function will be set is flashing.
3 Press the l (or j) button to set “Y” for the functions
described below.
ALARM IN . . The buzzer will be heard during
alarm recording.
TAPE END . . The buzzer will be heard when the
end of the tape is reached during
recording. To stop the buzzer,
press the STOP, EJECT, FF, REW
or PLAY button.
KEY IN . . . . . The buzzer will be heard when one
of the VCR buttons is pressed.
WARNING . . The buzzer will be heard if the
heads are dirty and recording
qualtiy deteriorate, or if the tape
stops or is ejected due to a
problem with the internal
mechanism. To stop the buzzer,
press the STOP button.
4 Press the SEARCH/AUDIO ON button to save the
setting.
NOTES:
X If “N” is set, the buzzer will not be heard.
X During timer recording mode, security lock engaged
mode and alarm recording mode, the buzzer will not be
heard when a button related to one of these modes is
pressed, even if “Y” is set for the “KEY IN” item.
CHECKING POWER FAILURE, FAILURE DUE TO
CONDENSATION AND USAGE DURATION
1 Press the MENU button until the (POWER FAILURE),
(DEW) and (USED TIME) menu is displayed.
(POWER FAILURE). . . The number of power
failures, and the date and
time of the most recent
power failure and recovery
are displayed.
(DEW) . . . . . . . . . . . . . The number of failures due
to condensation, and the
date and time of the most
recent failure and recovery
are displayed.
(USED TIME) . . . . . . . . The video heads usage
duration and the power on
duration are displayed.
Example
@@@@<POWER@FAILURE>
002@FAILURE@@12-25@07:15
@@@@RECOVERY@12-25@07:30
@@@@@@@@@<DEW>
001@FAILURE@@12-25@11:00
@@@@RECOVERY@12-25@12:00
@@@@@@<USED@TIME>
@@@@VIDEO@@@@@@@@@@00003H
@@@@POWER@@@@@@@@@@00007H
2 Press the SEARCH/AUDIO ON button, the normal
screen is displayed.
NOTE:
X If the MENU RESET button is pressed while the
(POWER FAILURE) and (DEW) menu is displayed, the
data is erased. The (USED TIME) data cannot be reset.
“@” will be erased from the digital display.
RC4Q/NA2 (TLS-9072 GB) Thu. Sept., 07/2000
32 English