Filter
Top Products
SCEPTRE X37 Page81
Problems Possible solutions
Can not receive UHF
Change the signal line to other input-end; make sure your
antenna is capable of receiving UHF.
Can not receive
sufficient channels
through antenna
Please use the channel scanning function to increase the number
of channels.
No colors
Please adjust the color setup, and make sure your signal cable is
tightly connected.
Blinking picture
accompanied
by signal box image
Check the connection of antenna/signal cable.
Broken lines or
segments
Adjust antenna. Keep the TV away from noise sources such as
neon lights, and hair dryer.
Certain TV channels
are
blocked
Please use the channel scanning function or v-chip function to
unblock.
Can not access a
picture menu
Make sure your Picture is both on “User
Mode” by pressing the
“Picture” button until the upper left hand corner says
“User Mode”.
Universal Remote Code
This television is designed with SONY television universal
remote codes.
TV has lines of colors
across the screen
This is a big LCD screen, it takes time for electricity to charge
up to power the screen and takes time for the large screen to
deplete all its residual electricity.
Please do not turn the TV on and off really quickly.
Between the time which you turn off the TV and the time
which you turn it on, there should be at least 50 seconds to 70
seconds.