Filter
Top Products
- 16 -
www.SCEPTRE.com
SCEPTRE X40 HDTV User Manual
1. Make sure the power of X40 LCD HDTV and your DVD player is turned off.
2. Obtain a Component Cable. Connect the green color connector to both your DVD player
and YPbPr’s green connector port on the back of your X40 LCD HDTV.
3. Connect the blue color connector to both your DVD player and YPbPr’s blue connector
port on the back of your X40 LCD HDTV.
4. Connect the red color connector to both your DVD player and YPbPr’s red connector
port on the back of your X40 LCD HDTV.
5. Obtain a RCA Audio Cable. Connect the white color connector to both your DVD player
and YPbPr’s white connector port on the back of your X40 LCD HDTV.
6. Connect the red color connector to both your DVD player and YPbPr’s red connector
port on the back of your X40 LCD HDTV.
7. Turn on the X40 LCD HDTV and your DVD player.
8. Use the remote control’s source button or the source button on the TV to switch to
YPbPr.
Please Note :
•
Please reference the DVD player’s manual as well, to make sure the DVD
player is configured to output correctly to the TV.
Connecting DVD player with S
Connecting DVD player with SConnecting DVD player with S
Connecting DVD player with S-
--
-Video…
Video…Video…
Video…
1. Make sure the power of X40 LCD HDTV and your DVD player is turned off.
2. Obtain an S-Video Cable. Connect the S-Video connector to both your DVD player and
AV’s S-Video connector port on the back of your X40 LCD HDTV.
3. Obtain a RCA Audio Cable. Connect the white color connector to both your DVD player
and AV’s white connector port on the back of your X40 LCD HDTV.
4. Connect the red color connector to both your DVD player and AV’s red connector port on
the back of your X40 LCD HDTV.
5. Turn on the X40 LCD HDTV and your DVD player.
6. Use the remote control’s source button or the source button on the TV to switch to
AV1(S-Video).
Please Note :
•
Make sure the yellow connector in the same group is not connected. You
can only connect either the S-Video port or the Yellow Video connector port.
DO NOT CONNECT BOTH.
•
Please reference the DVD player’s manual as well, to make sure the DVD
player is configured to output correctly to the TV.