- 38 -
www.SCEPTRE.com
SCEPTRE X40 HDTV User Manual
Progressive Scan – A way to scan vertical lines onto a TV picture by scanning all the lines
consecutively (progressively). In a fast moving action picture or sports channel, this type of
scanning will show NO pixilation.
How do I clean the TV ?
How do I clean the TV ?How do I clean the TV ?
How do I clean the TV ?
IMPORTANT
1. The power cable has to be removed from the socket before cleaning the TV.
2. Do not use volatile solvent (alcohol, rosin, and toluene) to clean the TV. These
types of chemicals might damage the housing and the LCD glass.
Cleaning the bezel and remote control
1. Use a 100% cotton cloth or micro-fiber cloth for cleaning.
2. If the remote control or bezel is dirty to the point where you cannot simply dry wipe
it, please lightly dampen the wiping material with clean water and wipe again.
Wipe the display with a dry micro-fiber cloth or 100% cotton cloth afterwards.
Please Note :
• Make sure you wring the water out of the cloth before cleaning
the bezel or remote in order to prevent water from penetrating
into the electronics.
Cleaning the Screen
1. Use a 100% cotton cloth or micro-fiber cloth for cleaning.
2.
The LCD screen glass is extremely fragile. Do not scrape it with any material. Do
not press or tap the screen to avoid cracking. When the screen is dirty to the point
where you cannot simply dry wipe it, please lightly dampen the wiping material with
clean water and wipe again. Wipe the display with a dry micro-fiber cloth or 100%
cotton cloth afterwards.
Switching Sources
Switching SourcesSwitching Sources
Switching Sources
There are many connections available on the back of the TV. To switch to them you must use the
SOURCE button located on the TV or the remote control. To switch to the source you want press
the SOURCE button, the use the ▲ or ▼ button to select the source you want and press ENTER.