- 4 -
www.SCEPTRE.com
SCEPTRE X40 HDTV User Manual
SAFETY INSTR
SAFETY INSTRSAFETY INSTR
SAFETY INSTRUCTIONS
UCTIONSUCTIONS
UCTIONS
This product is designed and manufactured to operate within defined design limits, and
misuse may result in electric shock or fire. To prevent the product from being damaged,
the following rules should be observed for the installation, use and maintenance of the
product. Read the following safety instructions before operating the display. Keep these
instructions in a safe place for future reference.
• To avoid the risk of electric shock or
component damage, switch off the
power before connecting other
components to the X40 LCD TV.
• Unplug the power cord before
cleaning the X40 LCD TV. Please use
the included custom bezel cleaning
cloth for cleaning the bezel of the X40
LCD TV only. Do not use a liquid or a
spray cleaner for cleaning the product.
Do not use abrasive cleaners.
• Always use the accessories
recommended by the manufacturer to
insure compatibility.
• When moving the X40 LCD TV from
an area of low temperature to an area
of high temperature, condensation
may form on the housing. Do not turn
on the X40 LCD TV immediately after
this to avoid causing fire, electric
shock or component damage.
• Do not place the X40 LCD TV on an
unstable cart, stand, or table. If the
X40 LCD TV falls, it can injure a
person and cause serious damage to
the appliance. Use only a cart or stand
recommended by the manufacturer or
sold with the X40 LCD TV.
• Any heat source should maintain a
distance of at least 5 feet away from
the X40 LCD TV, i.e. radiator, heater,
oven, amplifier etc. Do not install the
product too close to anything that
produces smoke or moisture.
Operating the product close to smoke
or moisture may cause fire or electric
shock.
• Slots and openings in the back and
bottom of the cabinet are provided for
ventilation. To ensure reliable
operation of the X40 LCD TV and to
protect it from overheating, be sure
these openings are not blocked or
covered. Do not place the X40 LCD
TV in a bookcase or cabinet unless
proper ventilation is provided.
• Never push any object into the
ventilation slots of the X40 LCD TV.
Do not place any objects on the top of
the Product. It could short circuit parts
causing a fire or electric shock. Never
spill liquids on the X40 LCD TV.
• Do not use the X40 LCD TV in a
portrait format (by rotating 90 degrees)
under high temperature environment
(25°C or higher), since this would
retard heat dissipation and would
eventually damage the TV.
• The X40 LCD TV should be operated
only from the type of power source
indicated on the label. If you are not
sure of the type of power supplied to
your home, consult your dealer or
local power company.
• The power cable must be replaced
when using different voltage from that
specified in the User Manual. For
more information, contact your dealer.
• The X40 LCD TV is equipped with a
three-pronged grounded plug, a plug
with a third (grounding) pin. This plug
will fit only into a grounded power
outlet as a safety feature. If your outlet
does not accommodate the three-wire