Filter
Top Products
12
9. Aim the remote control at your device (for
example, TV). Press any key but OK , , , or
EXIT to test that the remote control works with your
device. Use the keys to select a different code
within the same brand, if any. Press OK to save.
10. The LCD displays Success.
11. The LCD displays Edit Text. This option allows
you to change the default display for this mode
from the brand of the device (for example, Sony) to
a personalized display (for example, My TV). Press
OK to edit text, or press to exit without text
editing. See steps 4-5 of “Using Text Edit” on
page 25.
Programming a Device by Manually Entering Its Code
1. Turn on the device (for example, DVD player) and,
if needed, load media (for example, a DVD).
2. Press and hold P until the LCD displays
Code Set OK or .
3. Press OK once. The LCD displays Brand.
4. Use the keys to scroll through the
LCD display until it displays ID Set.
5. Press OK.
6. The LCD displays Press Mode OK or .
Press the mode on the remote for the device you
want to program (for example, TV).
7. The LCD displays Enter ID. Press OK. Enter the
first five-digit code for your device. As you enter
the code numbers, each number displays on the
LCD from right to left.
8. Press OK to confirm the code.
NOTE: If you do not press OK, the remote does not
save the code you entered.
9. The LCD displays Test followed by the code you
entered (for example, Test 10000).
NOTE: At this point, you can use function keys other
than OK, and
EXIT (for example, POWER) to
test the code.
10. Press OK once. The LCD displays Success.
NOTE: If you cannot find a code that works, see
“Programming a Device by Searching for Its
Code” on page 14.
11. The LCD displays Edit Text. This option allows
you to change the default display for this mode
from the code of the device (for example, 10000) to
a personalized display (for example, My TV). Press
OK to edit text, or press to exit without text
editing. See steps 4-5 of “Using Text Edit” on
page 25.
12. Repeat steps 1 to 11 for each device you want to
control. For future reference, write down each
working device code in a safe place.
RadioShack 8-in-1 LCD ENG.fm Page 12 Friday, February 9, 2007 6:11 PM