Filter
Top Products
5
INSTALLING BATTERIES
Your RadioShack 8-in-1 LCD Remote requires four
AAA batteries (not supplied) for power.
Battery Use And Safety
• Use only fresh batteries of the required size and
recommended type.
• Do not mix old and new batteries, different types of
batteries (that is, standard, alkaline, or rechargeable),
or rechargeable batteries of different capacities.
CAUTION: If you do not plan to use the remote for an
extended period, remove the batteries. They can leak
chemicals that can damage electronic parts.
WARNING: Dispose of old batteries promptly and
properly. Do not burn or bury them.
To Install Batteries:
1. Open the battery compartment cover (located on
the back of the remote).
2. Place the AAA batteries in the compartment and
match the + and - polarity symbols inside.
3. Replace the cover.
NOTE: The RadioShack 8-in-1 LCD Remote will not
lose any setup configurations, even when it
loses power.
RadioShack 8-in-1 LCD ENG.fm Page 5 Friday, February 9, 2007 6:11 PM