Filter
Top Products
19
7. The LCD displays Press To Mode. For the
destination mode, press a desired device key once
(i.e., AUX, CBL/SAT, CD, TV, DVD, AUDIO, VCR, or
PVR). For this example, press DVD once.
8. The LCD displays Press To Key. For the
destination key, press a key to be moved once. For
this example press VOL once.Upon keymoving,
the LCD displays Success.
9. Repeat steps 3 to 8 to move additional keys. For this
example, repeat steps 3 to 8 two more times to map
the remaining volume control keys, substituting
VOL and MUTE as source and destination keys in
steps 6 and 7.
Upon completion of the above procedure, you can now
use your RadioShack 8-in-1 LCD Remote to control the
TV’s volume and mute in the DVD mode, as well as in
the TV mode.
Restoring a Single Keymover Key
1. Press and hold P until the LCD displays
Code Set.
2. Use the or keys to scroll through the
LCD display until Key Mover is displayed. Press
OK.
3. The LCD displays Move key.
4. Use the or keys to scroll to Clear Move and
press OK.
5. The LCD displays Press from Mode.
6. Press the source mode once where the keymoved
key is stored.
7. The LCD displays Press From Key. Then press
the source key once. Upon key restoration, the LCD
displays Success.
8. If desired, repeat steps 4 through 6 to restore
another key.
Restoring All Keymover Keys in a Single Mode
1. Press and hold P until the LCD displays
Code Set.
2. Use the or keys to scroll through the
screen until Keymover is displayed. Press OK.
3. Use the or
keys to scroll to Clear All. Press
OK.
4. The LCD displays Press Mode or . Press the
mode you want to delete all keymoved keys from.
5. The LCD displays Are U Sure. Press OK.
6. The LCD displays Success and exits.
RadioShack 8-in-1 LCD ENG.fm Page 19 Friday, February 9, 2007 6:11 PM