Filter
Top Products
17
• For optimum learning, avoid high levels of ambient
light such as natural sunlight or energy-efficient
fluorescent lights.
NOTE: Please have your original remote controls
handy before programming learning.
Programming a Learned Key
1. Press and hold P until the LCD displays
Code Set OK or . Use the
keys to scroll through the LCD display
until Learn is displayed. Press OK.
2. The LCD displays Add Learn OK or . Press OK.
3. The LCD displays Press Mode or .
4. Press a mode key once (i.e., TV, VCR , PVR, CBL/SAT,
CD, DVD, AUX, or AUDIO) to assign a mode to learn
onto.
5. Place the RadioShack 8-in-1 LCD Remote head-to-
head (about 2" apart) from your original remote
control. Also locate the key (on your original
remote control) that you want the RadioShack 8-
in-1 LCD Remote to learn.
6. Press the key on your RadioShack 8-in-1 LCD
Remote that wish to assign learning.
7. On the original remote, press and hold the key.
Continue holding the key on the original remote
until the RadioShack 8-in-1 LCD Remote’s LCD
displays either Success or Learn Fail.
NOTE: Immediately after you have pressed the key
that will learn, the LED flashes rapidly and the
LCD displays Learning. The remote times
out after five seconds and returns to step 6.
8. Repeat steps 4 through 7 for another mode and/or
key or press EXIT to exit programming. Repeat
steps 5 through 7 if learning failed.
Deleting a Single Learning Key
T
his process returns the key to its original programmin
g
for the mode you select. You can also delete learned
programming by teaching a different function to the key
(see “Programming a Learned Key” on page 17).
1. Press and hold P until the LCD displays
Code Set OK or . Use the
keys to scroll through the LCD display
until Learn is displayed. Press OK.
2. Use the keys to scroll through the
LCD display until Dlt Learn is displayed. Press
OK.
2"
RadioShack 8-in-1 LCD ENG.fm Page 17 Friday, February 9, 2007 6:11 PM