Filter
Top Products
565069 Rev B EXPLORER 2000 User’s Guide 14
Optional Features, Continued
How to Use Bypass
When you use Bypass, the regular cable signal goes to your television, and
you can watch any regular cable channel. At the same time, the
EXPLORER 2000 sends digital cable signals to your VCR for digital channel
recording. When you disable the Bypass feature, both your VCR and TV
receive the cable signals.
1. Press
on the remote control to activate Bypass. The bypass
LED on the EXPLORER 2000 illuminates. Your VCR can now record the
channel to which the EXPLORER 2000 is tuned.
2. Press
on the remote control to de-activate Bypass, then tune your
TV to the VCR output channel (usually channel 3 or 4) in order to watch the
same channel to which the EXPLORER 2000 is tuned.
Continued on next page