Filter
Top Products
565069 Rev B EXPLORER 2000 User’s Guide A-9
How to Program the Remote Control, Continued
To Program for Volume Control
You can program the remote control to control the volume and mute functions
through the EXPLORER 2000, or through your TV.
1. Point the remote control away from the EXPLORER 2000, the TV,
and the VCR.
2. Press and hold and at the same time until the LED on the
remote control blinks twice.
3. Using the remote control keypad enter 993. The LED on the remote
blinks twice.
4. Press
or , depending on which device you want to control the
volume. The LED on the remote control blinks twice to confirm a valid
selection.
5. Point the remote toward the device on which you chose to control the
volume, and adjust the volume to confirm operation.