Filter
Top Products
How to Connect, Continued
Back Panel Connections
The following table describes the back panel connections and functions.
Item Description
Ethernet Port To connect two EXPLORER 2000 units together for use
with the Tape ‘N View
™
feature. See Installing Tape ‘N
View
™
for more information
USB (Universal To connect external equipment
Serial Bus) Port
Data Port To connect the VCR Commander
™
module or similar equipment.
See the VCR Commander
™
User’s Guide for more information
S-Video To connect a camcorder, a VCR with S-Video, or a TV
Output with S-Video. You use this connection, also connect the
L/R audio output on the EXPLORER 2000 to the same
connections on your TV, VCR, or stereo
Video Output To connect the video channel to a TV or VCR. You use
this connection, also connect the L/R audio output on the
EXPLORER 2000 to the same connections on your TV,
VCR, or stereo
Stereo Audio To connect left and right audio channels to a stereo receiver
Output or a TV with stereo sound. Required connections if you
connect the video output (see the previous item) to your
TV, VCR, or stereo receiver
Cable Output To connect the cable to a TV or a VCR
Cable Input To connect the cable signal from the cable company to
the EXPLORER 2000
RF Bypass To bypass the EXPLORER 2000 and watch regular
Option cable TV
AC Power To connect the EXPLORER 2000 power cord to an
Input electrical outlet
AC Switched To connect power to another device, typically your TV
Outlet
Continued on next page
565069 Rev B EXPLORER 2000 User’s Guide 18