Filter
Top Products
25 EXPLORER 2000 User’s Guide 565069 Rev B
Problems?, Continued
How to Replace the Remote Control Batteries
Your remote control requires two AA alkaline batteries.
1. Press forward then lift up on the lever on the back cover of the remote
control. The battery cover releases, and you can pull the cover up to
remove it.
2. Remove and safely dispose of the old batteries.
Caution:
Make sure you correctly align the positive (+) and negative (-) terminals on the
batteries to the corresponding terminals in the remote control.
3. Insert and firmly seat two new AA batteries (alkaline required) into the
battery compartment.
4. Slide the front of the battery cover back onto the remote control and snap
the back of the cover into place.
T6434
T6435
T6436