Filter
Top Products
Operating Features
Cable Box Setup
l'he CABLE CHAN function lets you
program to which channel the TV
will automatically tune when you
press the CABLE button on the
remote. This is handy if you have to
connect a cable box to your TV. You
will no longer have to remember the
output channel of the cable box
because the TV will remember for
yOtl.
For example, if you connect a cable
box to the TV's CABLE/ANTENNA
connector (as shown on page 19),
you will no longer have to remember
to select channel 2, 3, or 4 on the TV
to see what's coming from the cable
box. By entering the cable box's
output channel (usually 02, 03, or 04)
next to the CABLE CHAN function,
the TV will automatically tune to that
channel each time you press the
CABLE button on the remote.
This function is especially convenient
if you have a remote-controllable
cable box that can be operated by the
CABLE button on the remote (as
described on page 23). Pressing the
CABLE button will then not only
switch the remote to cable mode but
will also automatically tune the TV to
the proper channel for viewing the
picture from the cable box.
Setting Up Cable Box Channel
1. Repeatedly press SETUP to select the
CABLE CHAN function.
8:27 PM 13
. Enter the channel number you want to
program by pressing two digit buttons
on the remote control. (The channel
number you enter is the channel to
which the TV will tune automatically
when you later press the CABLE
button on the remote.) The TV will
change to the channel you select.
This will help you to confirm that it is
indeed the channel you want the TV
to automatically tune. Most cable
boxes output their signals on either
channel 02, 03, or 04.
3. Press the + button to program the
channel number you selected into
the CABLE CHAN function memory.
Note: Pressing the - button here will
turn off this feature and display
CABLE CHAN: OFF again.
18