Sears 274.4392839 CRT Television User Manual


 
Connecting Your TV
Home Antenna Connections
Follow one of the steps below to connect an indoor or outdoor antenna to your TV (only if you do not have a
cable-TV system).
A If the antenna cable coming from your home antenna is a 75-ohm round coaxial cable that carries only VHF (channels 2-13),
only UHF (channels 14-69), or VHF and UHF channels, connect it to your set like this:
CABLE/ANTENNA
Incoming
Cable
From _ _].
Home
Antenna VHF or UHF Only
or
VHF/UHF Combination
BACK
OF TV
B
C
-OR-
If the antenna cable coming from your home antenna is a 300-ohm fiat twin lead that carries only VHF (channels 2-13),
only UHF (channels 14-69), or VHF and UHF channels, connect it to your set like this:
Incoming
From _
Home
Antenna VHF or UHF Only
or
VHFIUHFCombination Adapter Adapter*
(supplied)
Push on
CABLE/ANTENNA
OFTV
-OR-
If the antenna cables coming from your home antenna(s) are a 75-ohm round coaxial cable that carries VHF (channels 2-13)
and a 300-ohm flat twin-lead cable for UHF (channels 14-69), connect them to your set like this:
CABLE/ANTENNA
Incoming UHF _ _- Pushon . (_)
Cables _--
From _ and Antenna Mixer*
Home [_ \
Antenna(s) VHF
BACK
OF TV
D
-OR-
If the antenna wires coming from your home antenna(s) are two 300-ohm flat twin-lead cables as shown here, connect them
to your set like this:
CABLE/A_I'ENNA
Incoming UHF
Cables
From /_ and
Home
Antenna(s) VHF
Push on
Antenna Mixer*
BACK
OFTV
Note: Be sure to connect the UHF antenna cable to the UHF screws on the Antenna
Mixer and the VHF antenna cable to the screws marked VHF.
* Optional accessories are available from most dealers or electronics supply stores.
20