Filter
Top Products
Connecting Your
Monitor Panel
@
CAUTION
TO AVOID DAMAGE:
1. DO NOT CONNECT
SPEAKER OUTPUT
TO A SEPARATE
AMPLIFIER OR
TO SPEAKERS
CONNECTED TO
ANOTHER
PRODUCT.
2, DO NOT CONNECT
LEFT AND RIGHT
SPEAKER OUTPUTS
TOGETHER. i
O
®
®
EXTERNAL SPEAKERS Terminals-permit direct
connection of auxiliary speakers. Connection details are
on page 32.
CABLE/ANTENNA Connector-used when attaching
either a home antenna or a cable-TV system to your TV.
Connection details are on pages 19-20.
SPEAKER Switch-when you connect additional speakers
to the EXTERNAL SPEAKERS terminals on the "IV, this
switch lets you optimize the sound for the speaker location
you choose.
• If you place the speakers on each side of the TV, put
switch in EXTposition. The internal audio from the
TV's speakers will be muted.
If you place the speakers behind the viewer (at the back
of the room), put switch in INT/EXT SURR position.
This maintains normal volume level of the TV's
internal speakers and a surround signal to rear
speakers.
• Details about connecting speakers to the TV are on
page 32.
IMPORTANT: Always place switch in INT/EXT SURR
position if no external speakers are used (or if external
speakers are ever disconnected).
@@
@@
@@
@
®
SELECT OUT Jacks-provide fixed-level audio and
video output from whatever is displayed on the TV
screen (except signal from S-VIDEO connector). Provide
audio and video signals suitable for recording.
Can be used for several applications such as:
• VCR editing with two or three VCRs (page 27).
• recording TV programs onto a camcorder (page 25).
• recording cable-TV programs onto a VCR that is not
cable-ready (page 27).
• recording audio onto an audio cassette tape recorder
(page 31.).
Notes
• Remember that the signal coming out of these jacks is
whatever you see (and/or hear) on the TV screen. So,
whatever you want to record must be displayed on the TV
screen during recording. Menus and status displays will not
appear in the recording.
• To record from an S-VHS component connected to the
S-VIDEO connector, you must also connect the video cable
to the VIDEO INPUT 1 jack and then select channel 91 on the
TV screen.
INPUT 2 Jacks-provide for direct connection of video
devices (like VCRs) or compatible home computers and
TV games with video/audio outputs.
To see the signals from a device that is connected to the
INPUT 2jacks, tune your TV to channel 92.
INPUT ! Jacks-provide for direct connection of video
devices (like VCRs) or compatible home computers and
TV games with video/audio outputs.
To see the signals from a device that is connected to the
INPUT 1jacks, tune your TV to channel 91.
S-VIDEO Connector--provides for direct S-VHS video
connection from S-VHS VCR or camcorder.
Remember to also connect the S-VHS VCRs or
camcorder's audio jack(s) to the TV's INPUT 1 LEFT
and/or R/MONO audio jacks. This is necessary because
S-Video cables only carry the super video (picture), not
the audio signal. Connection details are on pages 25
and 27.
Signals from S-VHS devices connected to the TV's
S-VIDEO connector and INPUT 1 audio jack(s) can be
viewed by pressing the TV button followed by 9 then 0
on the remote control-(or by scanning to TV channel 90
if you have added "90" to channel memory as described
on page 17).
Note: Remember to also connect the S-VHS component's
regular video cable to the VIDEO INPUT 1jack. Then tune to
channel 91 to use SELECT OUT jacks.
HI FI OUT Jacks-feed volume-controlled stereo audio
out from whatever is displayed on the TV screen. Allow
connection of audio amplifier and lets you adjust sound
level with TV's remote. Connection details are on page 30.
19