Filter
Top Products
Caring for Your TV
Trouble Checks (continued)
Noisy stereo reception
No picture, no sound but power light
is on
Sound okay, picture poor
Picture okay, sound poor
No stereo on known stereo station
When menu is displayed, pressing
RES/MEM does not go to previous
function.
Picture appears tilted
No closed captioning
Black bars appear on screen
• May be a weak station. UseAUDIO button to change STEREO/SAP function
to MONO setting instead of STEREO.
• Maybe someone changed CABLE/AIR function to wrong position.
• Maybe a vacant channel is tuned.
• For Channels 90, 91, and 92, make sure the component connected to those
INPUT jacks is turned on in order to see picture.
• If watching VCR (connected only through antenna input), make sure TV is
tuned to channel 3 or 4-same as CH3/CH4 switch on VCR. Also check to
make sure TV/VCR switch on VCR is in correct position.
• Check antenna connections.
• Try adjusting SHARPNESS function to improve weak signals.
• Try another channel.
• Try adjusting VOLUME, BASS, and TREBLE controls.
• If station is sending stereo, try changing STEREO/SAP function to MONO
setting for clearer sound.
• Make sure STEREO/SAP function is in STEREO mode.
• Maybe remote is not in "TV Mode". Press TV button, then press RES/MEM
again.
• Try adjusting the PICTURE TILT switches on the back of the TV.
Details are on page 3.
• Turn on the CAPTIONING function.
• TV program does not have closed captioning.
• Turn off the CAPTIONING function.
34