Filter
Top Products
32
Note
• Recording starts immediately
after you press REC/OTR
and continues until the disc is
full or you stop recording.
•When the clock setting has
not been made, the space for
a date and time of title names
in the Original or Playlist will
be blank.
• When you record a TV pro-
gram broadcasted in both
Stereo and SAP audio on a
DVD-RW/-R, you have to
select the TV channel audio
(Stereo or SAP) beforehand.
Only the selected channel
audio will be recorded. Refer
to “Selecting the TV Stereo or
SAP” on page 21 for more
details.
•You cannot mix two for-
mats on one DVD-RW
disc.
When you load a disc
once recorded before, the
recording format cannot
be changed even if you
change it in the setting
menu.
•You cannot change the
recording speed during the
REC pause mode.
•You can change channels dur-
ing the REC pause mode.
Basic recording
VCR/DVD RECORDER
COMBINATION
2
4
5
Follow steps below to record TV
programs.
1
Turn on the unit and load a
recordable disc.
Make sure that the TV input is set
on the unit.
2
Select a recording speed
using REC MODE.
Refer to “Recording speed” on
page 26.
3
Make sure that the recording
format is set to the desired
mode.
Refer to “Formatting a disc” on
pages 28-29.
When a DVD-RW disc is
loaded:
You can choose Video mode or
VR mode from the setting menu.
The default is “VR mode”. Refer
to “Choosing the recording for-
mat of a blank disc” on page 28.
When a DVD-R disc is loaded:
DVD-R discs will be always in
Video mode.
4
Select a desired channel to
record using CH K / L or
the Number buttons.
5
Press REC/OTR to start
recording.
“¶” mark will be displayed for 5
seconds.
To pause the recording, press
PAUSE F.Press REC/OTR or
PAUSE F to restart the
recording.
6
Press STOP C to stop the
recording.
I
CH 12
XP 0:58
press first.
DVD
6
Recording
This operation may take a
while to be completed.
This operation may take a
while to be recognized.
E9656UD_EN_1.qx4 05.7.15 11:55 AM Page 32