Sharp LC32LE450U Flat Panel Television User Manual


 
QUICK REFERENCE QUICK REFERENCE
1. Attach your antenna to the back of the
television. (See page 10.)
2. Connect the AC plug for the television into the
AC outlet.
Place the TV close to the AC outlet, and keep
the power plug within reach.
TO PREVENT RISK OF ELECTRIC SHOCK,
DO NOT TOUCH UN-INSULATED PARTS
OF ANY CABLES WITH THE AC CORD
CONNECTED.
3. When turning on the TV for the first time,
press POWER on the television.
/\
cH
+
VOL
MENU
INPUT
POWER
4. Insert the batteries into the remote control
unit. (See page 11.)
Speakers cannot be detached from the TV:.
The TV angle cannot be adjusted.
Use the remote control unit by pointing it towards the remote control sensor on the TV. Objects between
the remote control unit and the remote control sensor may prevent proper operation.
Cautions regarding the remote control unit
Do not expose the remote control unit to
shock. In addition, do not expose the remote
control unit to liquids, and do not place in an
area with high humidity.
Do not install or place the remote control
unit under direct sunlight. The heat may cause
deformation of the remote control unit.
The remote control unit may not work
properly if the remote control sensor on the
TV is under direct sunlight or strong lighting.
In such cases, change the angle of the
lighting or the TV, or operate the remote
control unit closer to the remote control
sensor
,"JT-_,.>. _'_ /
.::%__ /
t t_*/' / * The angle is 17 _when the stand is attached.
i
IMPORTANT:
If the POWER indicator light on the television still does not turn off, press POWER on the remote control
to turn the power on.
IMPORTANT:
IF THE UNIT DOES NOT POWER ON - UNPLUG THE TELEVISION FROM THE OUTLET AND REPEAT
THE INSTALLATION STEPS.
IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARR