Sharp LC42SB45U Flat Panel Television User Manual


  Open as PDF
of 27
 
7
Using the Remote Control Unit
UsetheremotecontrolunitbypointingittowardstheremotecontrolsensorontheTV.Objectsbetweenthe
remotecontrolunitandtheremotecontrolsensormaypreventproperoperation.
Remote control sensor
POWER indicator
30º 30º
30º
30º
17´ (5 m)
■
Cautions regarding the remote control unit
•Donotexposetheremotecontrolunittoshock.Inaddition,
donotexposetheremotecontrolunittoliquids,anddonot
placeinanareawithhighhumidity.
•Donotinstallorplacetheremotecontrolunitunderdirect
sunlight.Theheatmaycausedeformationoftheremote
controlunit.
•Theremotecontrolunitmaynotworkproperlyiftheremote
controlsensorontheTVisunderdirectsunlightorstrong
lighting.Insuchcases,changetheangleofthelighting
ortheTV,oroperatetheremotecontrolunitclosertothe
remotecontrolsensor.
IMPORTANT:
ThePOWERindicatoronthetelevisionshouldlightGREENindicatingyouhavepowertothetelevision.
IfthePOWERindicatoronthetelevisionstilldoesnotlightup,press POWERontheremotecontroltoturnthepoweron.
IMPORTANT:
IFTHEUNITDOESNOTPOWERON-UNPLUGTHETELEVISIONFROMTHEOUTLETANDREPEATTHEINSTALLATION
STEPS.
IFYOUSTILLENCOUNTERNOPOWER,PLEASECONTACTUSAT1-800-BE-SHARP.
QUICK REFERENCE
Attachyourantennatothebackofthetelevision.
(Seepage8.)
Bundlethecordsproperlywiththecabletie.
Howtoturnonthetelevisionforthersttime.
A) PressPOWER onthetelevision.
ConnecttheACplugforthetelevisionintotheAC
outlet.
B) ThePOWERindicatoronthefrontof
thetelevisionlightsGREEN.
•SpeakerscannotbedetachedfromtheTV.
•TVanglecannotbeadjusted.
•PlacetheTVclosetotheACoutlet,andkeepthepower
plugwithinreach.
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT
TOUCH UN-INSULATED PARTS OF ANY CABLES
WITH THE AC CORD CONNECTED.
1
2
3
4
Quick Installation Tips
ACoutlet
POWER
POWER indicator
POWER
 previous next