Filter
Top Products
Using a PC
1 Press MENU to display the MENU screen, and then
press 4/1_ to select the Setup or Option menu.
. Foradjusting "Auto Sync."or "FineSync.",select the
Setup menu.
. Forsetting "PCAudio Select", selectthe Option menu.
2 Press A/V to select a specific adjustment item,
and then press ENTER to set each item.
3 Press A/V (or 4/1_) to select or adjust the desired
setting, and then press ENTER.
Determines whether the AUDIO terminal is used for
INPUT 4 (PC-IN) or INPUT 6 (HDMI).
input 4 (PC}: Select this item when the audio signal is
input via the INPUT 4 (PC-IN) terminal using an analog
RGB cable.
input 6 (HDMI}: Select this item when the audio signal is
input via the INPUT 6 (HDMI) terminal using an HDMI-
DVI conversion cable.
. When "PC Audio Select" is set to "Input 6 (HDMI)", sound
will not be produced if you use only an HDMI-certified
cable to connect HDMI-compatible equipment. To produce
sound, you should make an analog audio connection.
. If you want to connect HDMI-compatible equipment using
only an HDMI-certified cable, set "PC Audio Select" to
"Input 4 (PC)".
For automatically adjusting the PC image.
Yes: Auto Sync. starts and "Now adjusting the image."
displays.
No: This function does not work.
. When Auto Sync. is successful, "Completed" displays. If
not, Auto Sync. failed.
. Auto Sync. may fail even if "Completed" displays.
. Auto Sync. may fail if the computer image has low
resolution, has unclear (black) edges, or is moved while
executing Auto Sync.
. Be sure to connect the PC to the TV and switch it on before
starting Auto Sync.
Ordinarily you can easily adjust the picture as
necessary to change image position using Auto Sync.
In some cases, however, manual adjustment is needed
to optimize the image.
H-Pos.: Centers the image by moving it to the left or
right.
V-Pos.: Centers the image by moving it up or down.
Clock: Adjust when the image flickers with vertical
stripes.
Phase: Adjust when characters have low contrast or
when the image flickers.
. For resetting all Fine Sync. adjustment items to the factory
preset values, press A/Y to select "Reset", and then press
ENTER.
o It is not necessary to adjust the "Clock" or "Phase" when a
digital signal is being input, so itcannot be selected.
. The default cursor position may not be in the center,
because the screen position variable ranges may be
asymmetrical.
. The screen position variable ranges depend on the View
Mode or the signal type. The ranges can be seen on the
position-setting screen.
It is necessary to set the PC correctly to display XGA
and WXGA signal.
Horizontal Vertical VESA
Resolution
Frequency Frequency Standard
VGA
SVGA
720 x 400
640 x 480
800 x 600
XGA 1024 x 768
WXGA 1360 x 768
SXGA 1280 x 1024
SXGA+ 1400 x 1050
UXGA 1600 x 1200
VGA and XGA are registered trademarks of International i
Business Machines Corp.
l
31.5 kHz 70 Hz
31.5 kHz 60 Hz O
37.9 kHz 72 Hz O
37.5 kHz 75 Hz O
35.1 kHz 56 Hz O
37.9 kHz 60 Hz O
48.1 kHz 72 Hz O
46.9 kHz 75 Hz O
48.4 kHz 60 Hz O
56.5 kHz 70 Hz O
60.0 kHz 75 Hz O
47.7 kHz 60 Hz O
64.0 kHz 60 Hz O
65.3 kHz 60 Hz O
75.0 kHz 60 Hz O
Q- 44