Filter
Top Products
27
E
ENGLISH
VIDEO ADJUSTMENT
(COMPONENT/VIDEO)
[CONTRAST]
Adjusts bright parts of the image.
[BLACK LEVEL]
Adjusts the entire brightness of the video signals.
[TINT]
Adjusts the hue. Selecting + changes the color towards
green, and selecting - changes it towards magenta.
[COLORS]
Adjusts the color intensity.
[SHARPNESS]
Adjusts the sharpness of the image.
[WHITE BALANCE]
Allows selection from the preadjusted settings. (For a guide
to the color temperatures of the adjustment values, see page
29.)
[GAMMA]
Select a gamma value.
MODE SELECT 1
[480 LINES] (ANALOG)
Manually selects input resolution.
[768 LINES] (ANALOG)
Manually selects input resolution.
[BEZEL] (DIGITAL/ANALOG)
Sets the frame width of the display when the enlargement
function is used.
[ENLARGE] (DIGITAL/ANALOG)
Sets the number of screen splits used for the enlargement.
(See page 30.)
[ENLARGE-POS] (DIGITAL/ANALOG)
Specify the split screen to be displayed when the
enlargement function is used. (See page 30.)
[MULTI ZOOM] (DIGITAL/ANALOG)
Adjusts the enlarged screen.
Pressing
displays the next menu.
IMAGE ZOOM ····Adjusts the scale of enlargement.
H-POS ················Adjusts the horizontal position.
V-POS ················Adjusts the vertical position.
[AUDIO]
Adjust the volume of the sound output from the speaker.
Pressing
displays the next menu.
TREBLE ·············Adjusts the volume of treble-level sound.
BASS ··················Adjusts the volume of bass-level sound.
BALANCE ···········Adjusts the balance of the audio sound
between right and left.
MODE SELECT 2
[OFF TIMER]
Set the time until the monitor turns off (enters standby mode)
between 0 and 23 in units of one hour.
This function is disabled when 0 is specifi ed.
[OSD H-POSITION]
Adjusts the horizontal display position of menu screen.
[OSD V-POSITION]
Adjusts the vertical display position of menu screen.
[LANGUAGE]
Sets the display language for the menu screen.
Pressing
displays the next menu.
[SCREEN MOTION]
[MOTION TIME 1]
[MOTION TIME 2]
When SCREEN MOTION is switched on, the screen image
moves vertically and horizontally to reduce the rate of
residual image formation.
When the time specifi ed in MOTION TIME 1 elapses, the
screen image is moved vertically and horizontally for a
certain period of time at the interval specifi ed in MOTION
TIME 2. After the movement stops and the time specifi ed
in MOTION TIME 1 elapses again, SCREEN MOTION
activates again.While the screen image is moving, the edges
of the screen may be hidden.
[POWER ON DELAY]
You can delay the screen display after the monitor is turned
on. The period can be set up to 60 seconds in units of
one second. When this function is activated, the power
LED fl ashes in orange. This function is disabled when 0 is
specifi ed.
[ID No. SET]
Assigns ID numbers to monitors connected in a daisy chain
(see page 36), using RS-232C cables.
The numbers 1 to 255 are available for ID numbers. If “0” is
set, the system regards this as the state where no ID number
is set.
[COLOR SYSTEM]
Select the color system of the AV equipment which is
connected to the composite video input terminal. (AUTO /
PAL / PAL-60 / SECAM / NTSC3.58 / NTSC4.43)
When AUTO is selected, the color system is automatically
set according to the input signal.
Menu Items