Filter
Top Products
ENGLISH
11
PREPARATION
Using the Remote Control
■ Use the remote control by pointing it toward the remote control sensor window
on the main unit. Objects between the remote control and sensor window may
prevent proper operation.
Cautions regarding use of the remote control
■ Do not expose the remote control to shock.
In addition, do not expose the remote control to liquid, and do not place it in an
area with high humidity.
■ Do not install or place the remote control under direct sunlight. The heat may
cause deformation of the unit.
■ The remote control may not work properly if the remote control sensor window
of the main unit is under direct sunlight or strong lighting. In such cases,
change the angle of the lighting or LCD TV set, or operate the remote control
closer to the remote control sensor window.
Batteries for the Remote Control
Before using the LCD TV set for the first time, install two (“AAA” size, UM/SUM-4) batteries (supplied). When the batter-
ies become depleted and the remote control fails to operate, replace the batteries with new (“AAA” size, UM/SUM-4)
batteries.
1
Open the battery cover.
■ Slide the cover while pressing the
(b) part.
2
Insert two (“AAA” size, UM/SUM-
4) batteries.
+
–
+
–
■ Position the positive and negative
ends of the batteries as indicated in
the compartment.
Caution!
Cautions regarding batteries
Improper use of batteries can result in chemical leakage and/or explosion. Be sure to follow the instructions below.
• Place batteries with their terminals corresponding to the (+) and (–) as indicated in the compartment.
• Different types of batteries have different characteristics. Do not mix batteries of different types.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new battery and/or cause the old
battery to leak chemicals.
• Remove batteries when they become weak.
Chemicals that leak from batteries can cause a rash. If chemical leakage is found, wipe with a cloth.
• The batteries supplied with the product may have a shorter life expectancy due to storage conditions.
• If the remote control will not be used for an extended period of time, remove the batteries from the remote control.
SLEEP indicator
CHARGE indicator
POWER indicator
Remote sensor window
CHARGESLEEPPOWER
3
Close the battery cover.
■ Engage the claw on the cover into
the battery housing and slide shut.